Tile & Flooring Planner
Tiles, wood or vinyl, room by room: pieces, area, wastage, adhesive, grout and skirting. Every rule is shown, every result has an accuracy band, and you can download it for your quantity list.
Your rooms
How we calculate
The rules behind every number
| What | Rule | Based on |
|---|---|---|
| Buy quantity | The higher of two counts: a tiler's row-by-row count (straight and brick layouts in rectangular rooms) and area divided by piece size plus wastage. Rounded up to whole pieces. | How tilers set out a floor; Indian estimating practice |
| Wastage, tiles | Straight 10%, brick 12%, diagonal 15%, herringbone 15%, chevron 18%. Add 5% for rooms under 60 sq ft, 5% for L-shaped rooms, 2% for large format laid straight. BaFlo defaults; you can change them. | Indian estimating norms 5 to 8%, retail and installer practice 10%, 15 to 18% diagonal and herringbone (MaterialDepot, Orientbell, Mapei, Laticrete) |
| Wastage, wood and vinyl | Straight 7%, diagonal 12%, herringbone 15%. | Laminate and SPC makers' guidance (5 to 10% straight, 10 to 15% herringbone) |
| Spares | 2% extra (at least 1 piece) per tile type, from the same batch, kept for future repairs. | Common practice: keep 2 to 3% attic stock |
| Tile adhesive | 1.2 kg/m² per mm of bed; the bed is about half the trowel notch. 6 mm notch 3.6 kg/m², 8 mm 4.8, 10 mm 6.0, 12 mm 7.2. Back-buttering adds about 1.5 kg/m². 5% extra. 20 kg bags. | Mapei Keraflex Maxi S1 India data sheet; checked against MYK Laticrete 315 Plus and Dr Fixit 406 |
| Trowel notch (default) | Wall tiles up to 600 mm: 6 mm. Floor tiles up to 300 mm: 8 mm. Floor tiles up to 600 x 600: 10 mm. Larger than 600 x 600, or 1200 mm and longer: 12 mm with back-buttering. | Manufacturer guidance by tile size |
| Grout | kg/m² = (L + W) / (L x W) x joint width x joint depth x density. Density 1.75 kg/L cement grout, 1.6 kg/L epoxy. Joint depth = tile thickness. 10% extra. | Roff Rainbow Tile Mate data sheet (the formula matches its table); Mapei, Laticrete |
| Cement mortar bed (option) | 20 mm bed of 1:4 cement and sand, dry volume factor 1.33, plus cement slurry 3.3 kg/m². 50 kg cement bags. | Indian schedule-of-rates practice |
| Skirting | Running length = room perimeter minus door widths. Strips are cut along the long side of the floor tile with a 3 mm cutting allowance; 10% extra. | Indian rate analysis for tile skirting |
| L-shaped rooms | Overall length x width minus the missing corner. Skirting and walls follow the full perimeter, which is the same as the overall rectangle. 5% extra wastage for the extra cuts. | Geometry |
| Tile direction | For rectangular tiles and planks you can fix which way the long side runs; otherwise the planner uses whichever direction needs fewer pieces. | How tilers set out |
| Walls | Wall run x tiling height, minus doors and windows inside the tiled zone, plus their returns (reveals) if you tile them. | Bathroom BOQ practice |
| Wood and vinyl extras | Underlay = floor area + 5% for overlaps. Beading = perimeter minus doors. One transition strip per door. Leave an 8 to 10 mm gap at walls in Chennai's humidity. | Pergo and laminate installation manuals |
| Accuracy band | Starts at 100 and loses points for rough measurements, L-shaped rooms, large pieces in small rooms, diagonal or herringbone layouts, missing doors and windows, unknown surface flatness and unconfirmed tile thickness. 90+ = within about 5%, 75 to 89 = 8%, 60 to 74 = 12%, below 60 = 15%. Adhesive varies up to 25% with surface flatness; grout up to 20% with joint depth. | BaFlo method, based on the main causes of site shortfalls |
Why don't you show the number of boxes?
Pieces per box change from product to product, even within one size. We give pieces and area, which work for any brand. Tell us the product and we will convert it to boxes for you.
Why is the tile count higher than area divided by tile size?
Because tiles are laid in rows. If a 600 mm tile does not divide your room exactly, every row needs a cut piece, and two cuts rarely come out of one tile. The planner counts rows the way a tiler does and uses whichever count is higher.
How accurate is it?
Each result carries an accuracy band. Answer the three questions under "How sure are these sizes?" to tighten it. Your installer should still check the final count on site before you order.
Come and see it in person
BaFlo Luxe1st Floor, Narada Gana Sabha
254/314, TTK Road, CIT Colony, Alwarpet
Chennai, Tamil Nadu 600018
We're on the 1st floor of Narada Gana Sabha, TTK Road, Alwarpet. Take the stairs or the lift up from the main entrance.
- Open
- Monday to Saturday, 10 am to 7 pm
- Phone
- 098408 44006
- 098408 44006
Visited us? Review us on Google