Skip to content

Floor slope and drain fall

How much a wet floor must fall towards the drain, how thick the screed gets at the far end, and whether your tile size works with the drain you have planned.

Sizes in
Where is it?

How we calculate

The rules behind the numbers
WhatRule
FallFall = distance from the farthest point to the drain ÷ gradient (1:80 means 1 mm for every 80 mm).
Screed at the high pointScreed at the drain + fall. The drain end needs at least 15 to 20 mm of sand-cement screed.
GradientsShower area: 1:80. Indian practice 1:80 to 1:100. Australian practice 1:80; the US (TCNA) minimum is steeper, 1:48. Bathroom dry floor: 1:100. 1:100, or keep level with a 5 to 10 mm step down at the shower. Balcony or utility: 1:80. 1:80 to 1:100 towards the outlet. Open terrace: 1:80. 1:100 minimum, 1:80 preferred (no code clause found; common practice). Accessible shower (wheelchair): 1:60. Level-access showers commonly use about 1:60 so water stays in the shower zone without a step.
Tile sizeA point drain needs the floor to fall in four directions, so tiles must be small (about 100 to 150 mm, or mosaic) to follow the slope. A linear drain needs only one slope, so any tile size works.
Longest runCorner trap: the diagonal of the wet area. Trap at the middle of a wall: from the far corner, √((L/2)² + W²). Centre trap: half the diagonal. Linear drain along a wall: the width across to it.
Screed quantityArea x average thickness. 1:4 cement-sand, dry volume factor 1.33, 50 kg bags.

Come and see it in person

BaFlo Luxe
1st Floor, Narada Gana Sabha
254/314, TTK Road, CIT Colony, Alwarpet
Chennai, Tamil Nadu 600018

We're on the 1st floor of Narada Gana Sabha, TTK Road, Alwarpet. Take the stairs or the lift up from the main entrance.

Open
Monday to Saturday, 10 am to 7 pm
WhatsApp
098408 44006

Visited us? Review us on Google